PCB solderless connector

2024-05-31 13:24:40 Jiaxing Focusimple Electronics Co., Ltd. Viewd 141

Solderless Compression Mount type, solderless probe-type and Edge-Launch connectors are among the most widely choices for high-speed digital component testing and test and measurement today.Focusimple offers a wide range of PCB solderless connectors in a variety of configurations, and has been in the microwave industry for over 10 years, designed to provide the lowest VSWR solution for single and multi-layer microstrip or grounded coplanar PCBs, with a modeless wide response up to 110 GHz.

 

These termination End Launch connectors feature a unique two-piece bottom fixture that accommodates board thicknesses up to 300 mil (7.62mm) for effective grounding between the connector and the PCB. The connector pins are designed to mate with the board trace, eliminating the need for soldering. The combination of the bottom fixture and solderless pins provides for easy removal and reuse.


EN-PCB免焊VS焊接


Features & Benefits:

l  Easy to install and remove,Diverse optional types

l  Low VSWR,Low Insertion Loss

l  Rugged & Durable

l  Excellent Repeatability


Application:

l  Test & measurement

l  Research & development

l  High-speed digital component testing

l  Precision PCB board thin base material interconnection installation


PCB application


Types:

PCB types

l  Probe Type: Stripline, vertical installation.

When in contact with the PCB sheet, the centre conductor elastically retracts to ensure the integrity of the contact surface of the PCB sheet, resulting in more stable product performance.

l  Compression Mount Type: Stripline, vertical installation.

Robust mechanical construction, especially suitable for thicker and harder plates;

Stable RF signal transmission, an efficient and economical solution for stripline connections.

l  Compression Mount Type: Microstrip line, vertical installation.

Robust mechanical construction, especially suitable for thicker and harder plates;

Stable RF signal transmission, an efficient and economical solution for Microstrip line connections.

l  Edge Launch Type: Microstrip line, Edge panel mounting.

Mounting at the edge of the PCB;

Signal transfer traces of connector inner conductor is co-linear with the PCB signal transfer;

Suitable for high frequency operation.


What is Microstrip & Stripline?

Stripline

A type of transmission line that consists of a conductor sandwiched between two ground planes, all embedded within a dielectric material

Excellent external EMI shielding

Thicker and more difficult to manufacture

Microstrip

A type of transmission line that consists of a single conducting strip separated from a ground plane by a dielectric layer

More susceptible to external electromagnetic interference

Easier to manufacture and cost-efficient


Microstrip & Stripline


Solderless PCB Connectors at a Glance:

Solderless PCB Connectors at a Glance

Specifications:

 PCB specifications

# If you need anything, feel free to reach out to us!